1
FEATURES:
TECHNICAL
?
Symmetrical Topology, Fully Regulated, Triple-Split-Rail Power Supply
?
Isolated Input Section Utilizing “Quasi-Differential”
Instrumentation Amplifier Technology
?
Up To 12VRMS Input Signal Voltage Capability (With -12dB Attenuator)
?
Third-Order 18dB/Octave Butterworth Crossover Topology
?
Wide Bandwidth/Low Distortion Symmetrical Gain Output Stage
?
4 oz. (3 oz. on D7152) Gold Plated Copper Circuit Board
?
High Efficiency Forced-Air Cooling System
?
Massive 3-Piece Proprietary Heatsink
?
Solid Copper High-Current Power Distribution Busbars
CONVENIENCE/APPEARANCE
?
Two 3-Way Fully Variable and Independent Electronic Crossovers
in Top-Mount Configuration with Supplied Plexiglass Security Cover
(Separate Independent Crossover for RCA Outputs)
?
24-Karat Gold Plated Solid Brass, Circuit Board Mounted, 4 Gauge
Direct or Ring Terminal Power/Ground Connector Blocks
?
24-Karat Gold Plated Solid Brass, Circuit Board Mounted, 10 Gauge
Direct or Banana Plug Direct Speaker Connectors
?
Tinted Plexiglas Circuit Board Viewing Panel
?
Solid Billet CNC Machined End Panels with Adjustable
Mounting Flanges
SPECIFICATIONS
Frequency Response:
3 – 50,000 Hz
Signal-to-Noise Ratio:
96dB (D7152), 102dB (D7402)
THD: 0.02%
Channel Separation:
80dB
Input Sensitivity:
.5 to 12VRMS
Input Impedance:
>40kOhms
Power Supply Operating Range:
10 to 16VDC
DIMENSIONS
D7152 Dimensions
D7402 Dimensions
Length:
17 3/4"
Length:
24 3/4"
Width:
10 5/8"
Width: 10 5/8"
Height:
3"
Height:
3"
20
SYSTEM DIAGRAM 4
Two Channel System with
Three Bridged Amplifiers
D7 two channel amplifier
?
Channels 1/2 Highpass & Bridged to a
component set using Front Left RCA and
Rear Left RCA from source unit or EQ
D7 two channel amplifier
?
Channels 1/2 Highpass & Bridged to a
component set using Front Right RCA and
Rear Right RCA from source unit or EQ
D7 two channel amplifier
?
Channels 1/2 Lowpass using Subwoofer
RCA outputs from source unit or EQ to
a pair of bridged 8 Ohm subwoofers
D7152 and D7402 manual #135.p65
8/30/2002, 2:37 PM
1
