3
Preparation
Brewing Coffee
1.
Install the Drip Tray on front of the Diamo One if
desired.
2.
Wash the Water Tank with warm soapy water.
3.
Fill the tank with water.
(Maximum capacity: 37 oz. / 1.1L)
4.
Place the full tank on the back of the Diamo One. You
must have the tank lid OPEN in order to slide it fully
into place.
5.
Close tank lid.
6.
Plug in the power cord.
HELPFUL TIP:
Before brewing your first cup, we recommend
running through the instructions below with just water for a
practice run or two. This will help avoid any mishaps
later! Place a cup under the spout and collect any water
as it comes out.
When you practice with the steam tube,
make sure you submerge the tip first!
1.
Turn the Coffee/Steam Knob to the “Coffee” position
then push the Power button. The Power button LED
will flash red while it pre-heats. The Power button
LED will turn solid green when pre-heating has
finished.
2.
Use the Coffee Strength Dial to adjust the strength of
your brew. Setting number 1 will produce the weakest
brew while 3 produces the strongest.
3.
Place your cup on the drip tray underneath the spout.
4.
Slide open the E.S.E Pod Slot Cover, drop your pod
into the slot, and close the cover.