background image

1. INTRODUCTION

This user and maintenance manual will set out the guidelines and proce-

dures that must be followed by those operating this equipment in order to 

guarantee:

• Operators’ safety

• Correct use of the machine 

• Optimum performance 

IT IS NECESSARY THAT THE AUTHORIZED PERSON-

NEL AND MACHINE OPERATOR HAVE READ AND 

UNDERSTOOD THE MANUAL BEFORE USING THE 

MACHINE. 

Due to the importance of this information, we recommend that the 

operator:

• Always keeps this manual close at hand for easy consultation

• Keeps the manual in a safe place in order to prevent loss or damage

• Asks the manufacturer/supplier for a replacement copy in case of loss or 

damage

• Supplies this manual and the manufacturer’s details together with the 

machine if it is sold to a third party

The manufacturer reserves the right to update its products and manuals 

and is not required to provide updated versions of the them. 

2. WARRANTY 

DiamaPro SVX model vacuums are warranted to be free from manufactur-

ing defects in normal service for a period of one or two years from the date 

of purchase by the original consumer purchaser. Component manufac-

turers offer separate warranty periods. Call 800-622-2048 for complete 

information.

DiamaPro System’s obligation under this warranty is expressly limited to 

the replacement of such part or parts as inspection shall disclose to have 

been defective.

This warranty does not apply to defects caused by damage, unreasonable 

use, faulty repairs made by others or defects caused by failure to provide 

reasonable maintenance.

Further, the warranty is void if the product, or any of its components, is 

altered or modified by the consumer or if the product is used in an inappro

-

priate manner or with equipment not recommended by the manufacturer.

Wear items are not covered under warranty: examples include: belts, 

wheels, casters, bearings, cart wheels, filters, wear pads, spark plugs, 

hoses, wands and squeegees, motors, etc.

To qualify for warranty coverage, DiamaPro SVX vacuums must be regis-

tered within 30 days of purchase. Registration can be completed online at 

www.DiamaProSystems.com.

To request your warranty service you MUST send a written request to:

DiamaPro Systems 

P.O. Box 19946 

Charlotte, NC, 28219 

including the manufacturing details that can be found on a plate fitted 

inside your machine together with a copy of the invoice. 

The warranty is invalid under the following conditions:

• Improper use of the machine or total or partial failure to comply with the 

contents of this manual

• Any part of the vacuum cleaner is altered or modified in any way

• Incorrect electrical installation

• If the laws in the country of use are not respected

• Inadequate maintenance

• The machine has not undergone routine maintenance as specified in this 

manual

• Use of spare parts that are not produced by DiamaPro or not specifically 

indicated for the model in use 

• Partial or total failure to comply with the instructions given in this manual 

3. UNINTENDED USE

• Do not use the machine for sucking up liquid material

• Do not use the machine or expose the machine to water, rain, or rain like 

environments

• Do not use the machine with improper extension cords or extension cords 

of improper length

4. MACHINE DATA 

4.1 TECHNICAL DATA PLATE

Every DiamaPro machine carries a registration plate showing essential 

details that are necessary when contacting the supplier/manufacturer for 

advice, suggestions or information on spare parts. The following details are 

included on the plate:

• Manufacturer 

• Model

• Supply voltage

• Installed rated power

• CE symbol (built in compliance with Machinery Directive 2006/42/EEC) 

4.2 SAFETY DEVICE

The vacuum cleaner has been manufactured in compliance with all legal 

standards for the operator’s safety.

• All metal components are grounded to eliminate shock or electrostatic 

discharge, including the flexible suction hose that is properly grounded. 

Also in this regard the choice of a suitable flexible suction hose allows to 

eliminate this risk on the hose length that goes from the use area to the 

vacuum cleaner. 

• The brakes fitted onto the anterior pivoting casters safely fix the machine 

in its place of use where there may be a risk of movement due to uneven 

floor surfaces or other particular working conditions. 

BEFORE USING THE MACHINE CHECK THAT THE 

MACHINE HAS NOT SUFFERED ANY SHOCKS OR 

DAMAGES DURING THE TRANSPORT  THAT CAN 

AFFECT THE OPERATION OF THE ABOVE DEVICES

5. PERFORMANCE TOLERANCES

The performance of the machine may vary based upon environmental 

factors such as temperature, air pressure, humidity, etc.

6. SAFETY PROVISIONS

• Carefully read the instructions in this manual before starting, using, ser-

vicing or operating the vacuum cleaner 

• Check that the vacuum cleaner hasn’t been damaged in any way 

• Never turn on the machine if it is faulty or if you suspect it is faulty 

• Check that the switch isn’t worn or damaged 

• Do not approach the suction intake of the machine with unfastened or 

broken garments that could easily be sucked into the machine 

• Check that the filters are present and efficient 

• Make sure that the filters are installed correctly and in full working order, 

always observing the regulations in force in the workplace 

• Do not carry out repairs without the manufacturer’s authorization 

• Never use gasoline, solvents or other flammable liquids for cleaning; only 

proper detergents should be used for cleaning 

• Never move the machine by pulling the power cable or flexible hose

• Never direct the opening of the machine or the flexible tube towards 

people or animals 

• Protect the machine from the rain 

• Check that the machine is connected to a power source with the correct 

voltage indicated on the registration plate 

• Make sure that the power cable has no wear or damage. If replacing 

the cable, always replace it with another of the same specifications as 

the original one: cables that are not approved or of inferior quality may 

overheat and cause serious injury to the user 

• Make sure that the machine is connected to an appropriate power source 

in full working order (check the presence of a fully functional grounding 

socket) 

• Repairs must only be carried out by authorized personnel and only when 

the machine is turned off and disconnected from the power source 

• Never allow unauthorized personnel to use the machine

• Make sure that all safety devices are in full working order before turning 

on the machine 

• Never cover the vacuum cleaner during use 

Summary of Contents for SVX3-A














Reviews: