FUNCTIONAL DESCRIPTION
n
Operation Instructions:
Wheel Guard
Aim the convex end of the wheel
guard to the slot mouth of the
front cover, and then rotate the
guard body to 180
°,
finally tighten
the fastening screw (Fig1 & Fig2).
Side grip (Fig 5)
CAUTION:
Always be sure that the side grip
is installed securely before oper-
ation.
Screw the side grip securely on
the position of the tool as shown
in Fig5.
Hold the side grip firmly by hand to
better control the tool.
Fig5
Installing or removing
grinding wheel
CAUTION:
• When using an abrasive cut-
off wheel, be sure to use only
the supplied wheel guard,
inner flange, and outer flange
designed for use with cut-off
wheels.
1. Mount the inner flange onto the
spindle. Fit the wheel/disc on
the inner flange and screw the
outer flange onto the spindle
(Fig 3).
2. To tighten the outer flange,
press the shaft lock firmly
so that the spindle cannot
revolve, then use the lock nut
wrench and securely tighten
clockwise (Fig 4).
3. To remove the wheel, follow
the installation procedure in
reverse.
NOTICE:
The groove of INNER
FLANGE must align the
flatness of spindle when you
install the wheel and tighten
enough.
Fig1
Fig2
Fig3
