Changing Parts
46
Changing Parts
The computer is designed to allow changing its system memory and hard disk drive.
If you need to change any of them, follow the respective procedures below.
The standard warranty does not cover any damage due to improper
operation.
Please refer to “Features” section on page 10 to see the specifications
of system memory and hard disk drive.
Changing System Memory
1
Disconnect AC adapter and remove battery pack.
2
On the bottom of computer, release the screw fixed on the cover of memory
compartment and then pull the cover out.
3
Slightly release two fasteners on SO-DIMM DDR module with your fingertip
and take the module out.
Dialogue Flybook V2/V3 Series User’s Guide