background image

Quick Install Guide

Dialogic® IP Media Server

Quick Install

Guide

This Dialogic® IP Media Server 

Quick Install Guide

 

is for qualified personnel who are responsible for 

installing the server.

The Dialogic® IP Media Server is an open, carrier-

class IP media server. It leverages the simplicity 

and flexibility of SIP and VoiceXML to provide a 

cost-effective and scalable IP media server option 

that is suitable to power a broad range of voice and 

video services for next generation wireline, wire-

less, and broadband networks.

Dialogic® IP Media Server software is available  on 

an integrated platform to address individual deploy-

ment requirements:  

 

• Low-profile 1U rack-mount server

 

• 2.8 GHz dual processor system

 

• Dual Ethernet ports

 

• Dual or single power supply systems

 

• Optional factory-installed EDP-10 

 

   DSP for dedicated digital signal 

 

   processing

Dialogic® IP Media Server technology is based on 

the Intel 1U Server Chassis SR1450 and the Intel 

Server Board SE7520JR2. 

For additional technical information concerning the 

Intel chassis and server, see the Intel Technical 

Product Specification on the documentation CD 

included with the IP Media Server. 

Overview

Optional Components

To install the Dialogic® IP Media Server, you 

need the following:

 

• Phillips-head screwdriver for mounting 

 

   the chassis to the rack

 

• Cables for the RJ45 NIC interfaces

 

• PC or laptop with a terminal emulation 

Dialogic recommends that the systems be pow-

ered using a UPS system for reliability and 

protection from power fluctuations.

Requirements

Contact Information

               

Dialogic provides support for those customers 

who have purchased a support contract for the IP 

Media Server. If you purchased products from a 

reseller, please contact that reseller for technical 

support. 

Please use the following web site to contact 

Dialogic support:

1
2
3
4

5

6

7

8
9

10
11

USB 2.0 port
NMI button
Reset button
Hard disk drive LED

NIC 0 Activity LED

NIC 1 Activity LED

System Status LED

Power/Sleep button
Power/Sleep LED

System Identification button
System Identification LED

Allows you to attach a USB component to the front of the chassis.
Puts the server in a halt-state for diagnostic purposes.
Reboots and initializes the system.
Random blinking green light indicates hard disk drive activity (SCSI).  
No light indicates no hard disk drive activity.
Blinking green light indicates network activity.
Continuous green light indicates a link between the system 
and the network to which it is connected.
Blinking green light indicates network activity.
Continuous green light indicates a link between the system 
and the network to which it is connected.
Solid green indicates normal operation.
Blinking green indicates degraded performance.
Solid amber indicates a critical or non-recoverable condition.
Blinking amber indicates a non-critical condition.
No light indicates POST is running or the system is off.
Toggles the system power on/off. 
Continuous green light indicates the system has power applied to it.
Blinking green indicates the system is in S1 sleep state. 
No light indicates the power is off / is in ACPI S4 or S5 state.
Toggles the front panel ID LED and the server board ID LED on and off. 
Solid or blinking blue indicates system identification is active.
No light indicates system identification is not activated.

Note:

 The server board LED is visible from the rear of the chassis 

and allows you to locate the server from the rear of a rack of systems.
 

Dialogic® IP Media Server  

 

       Front Control Panel

Dialogic® IP Media Server  

 

 

 

 

Rear View

Copyright 

2006-2008, Dialogic Corporation 

Part Number: 

939-018-11

0

1

ID

!

ID

1

2

3

4 5

6 7

8

9 10 11 

Mouse

eth0

eth1

Keyboard

Video 

SCSI

Half-Height PCI Slot

Serial Port 

USB1

USB0

Full-Height PCI Slot

EDP-10 DSP Card (optional) 

F - Front 

Power Supply 

B - Back

Power Supply

(optional)

The integrated Dialogic® IP Media Server is 

available with optional components. A second

redundant power supply is available as a factory-

installed option. 

The Dialogic® IP Media Server is also available 

with an optional EDP-10 DSP that enables G.726, 

G.729, and AMR-NB* codecs. This is a factory-

installed option, not a field-upgradable option. 

Note that although your IP Media Server may 

have open disk drive bays, these must not be 

upgraded with field-installed drives. 

*Use of the AMR-NB resource in connection with a Dialogic® product does 

not grant the right to practice the AMR-NB standard. To seek a patent 

license agreement to practice the standard, contact the VoiceAge 

Corporation at http://www.voiceage.com/licensing.php

www.dialogic.com/support/

Dialogic® IP Media Server  

 

 

 

 

Front View

Copyright and Legal Disclaimer  

Copyright © 2006-2008 Dialogic Corporation. All Rights Reserved. You may not reproduce this document in whole or in part without permission in writing from Dialogic Corporation at the address provided below. All contents of this 
document are furnished for informational use only and are subject to change without notice and do not represent a commitment on the part of Dialogic Corporation or its subsidiaries (“Dialogic”). Reasonable effort is made to ensure the 
accuracy of the information contained in the document. However, Dialogic does not warrant the accuracy of this information and cannot accept responsibility for errors, inaccuracies or omissions that may be contained in this document. 
INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH DIALOGIC® PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. 
EXCEPT AS PROVIDED IN A SIGNED AGREEMENT BETWEEN YOU AND DIALOGIC, DIALOGIC ASSUMES NO LIABILITY WHATSOEVER, AND DIALOGIC DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF 
DIALOGIC PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT OF A THIRD PARTY.  Dialogic products are 
not intended for use in medical, life saving, life sustaining, critical control or safety systems, or in nuclear facility applications.  Due to differing national regulations and approval requirements, certain Dialogic products may be suitable for use 
only in specific countries, and thus may not function properly in other countries. You are responsible for ensuring that your use of such products occurs only in the countries where such use is suitable. For information on specific products, 
contact Dialogic Corporation at the address indicated below or on the web at www.dialogic.com.  It is possible that the use or implementation of any one of the concepts, applications, or ideas described in this document, in marketing 
collateral produced by or on web pages maintained by Dialogic may infringe one or more patents or other intellectual property rights owned by third parties. Dialogic does not provide any intellectual property licenses with the sale of 
Dialogic products other than a license to use such product in accordance with intellectual property owned or validly licensed by Dialogic and no such licenses are provided except pursuant to a signed agreement with Dialogic. More 
detailed information about such intellectual property is available from Dialogic’s legal department at 9800 Cavendish Blvd., 5th Floor, Montreal, Quebec, Canada H4M 2V9. Dialogic encourages all users of its products to procure all necessary 
intellectual property licenses required to implement any concepts or applications and does not condone or encourage any intellectual property infringement and disclaims any responsibility related thereto. These intellectual property 
licenses may differ from country to country and it is the responsibility of those who develop the concepts or applications to be aware of and comply with different national license requirements.  Dialogic, Dialogic Pro, Brooktrout, Cantata, 
SnowShore, Eicon, Eicon Networks, Eiconcard, Diva, SIPcontrol, Diva ISDN, TruFax, Realblocs, Realcomm 100, NetAccess, Instant ISDN, TRXStream, Exnet, Exnet Connect, EXS, ExchangePlus VSE, Switchkit, N20, Powering The Service-Ready 
Network, Vantage, Making Innovation Thrive, Connecting People to Information, Connecting to Growth and Shiva, among others as well as related logos, are either registered trademarks or trademarks of Dialogic. Dialogic's trademarks may 
be used publicly only with permission from Dialogic. Such permission may only be granted by Dialogic’s legal department at 9800 Cavendish Blvd., 5th Floor, Montreal, Quebec, Canada H4M 2V9. Any authorized use of Dialogic's trademarks 
will be subject to full respect of the trademark guidelines published by Dialogic from time to time and any use of Dialogic’s trademarks requires proper acknowledgement.  The names of actual companies and products mentioned herein 

Reviews: