Dialogic IMG 1010 Integrated Media Gateway Quick Start Guide
6
Connecting DATA0 Port
1.
The port DATA 0 that is located on the rear of the IMG 1010 is a Gigabit-Ethernet port
and is dedicated to VoIP Bearer traffic. The DATA 0 port can be on either the same IP
network as the management network, or can be connected to a separate network. See
the topics under the following headings in the Online Documentation for more
information.
IMG 1010-Installation and Setup Guide > IMG 1010-Hardware Installation
2.
The IP addresses for these ports will be assigned through the ClientView GUI. See the
ClientView section below for more information.