DIALAB DTN-410 K, User Manual, Page: 11 / 20

I 11 I
DIALAB PHOTOMETER DTN-410K USER MANUAL
2. Standard 10 mm x 10 mm holder for macro or semi-micro cuvettes. Useful for coagulation
tests and special methods.
Aspiration system:
Built in peristaltic pump driven by stepper motor; programmable; reversible for sample
recovery.
Reaction volume: variable 100 to 500ml per test.
Carryover <2 % for sipping volume> 400 ml.
Operator´s interface:
Membrane keyboard with 25 buttons for functions and numeric entries, external keyboard for
patient handling.
Data presentation:
Graphic LCD display 20 x 40 characters with backlight.
Printer:
Thermal, graphic 24 characters per line.
Programs:
132 open system tests.
30 non-linear calibration curves.
Printer control.
Variable aspiration rate and sample recovery.
Automatic calibration and test mode.
Quality control.
Analysis modes:
Absorbance/Concentration
Endpoint with and without blank
Sample and reagent blank
Standard or factor. Factor storage in all methods.
Non linear calibration mode.
Enzyme kinetics with and without sample blank.
Two–point kinetics. Incubation up to 10 minutes. Measure time from 15 to 600 seconds.
Direct coagulation reading in cuvette by turbidimetric variation. Absorbance plot for accurate
threshold determination. Direct observation of the coagulation rate.
Bichromatic operation.
Interface:
RS232 C
Power requirements:
100 –240 VAC: 50/60 Hz: 150 VA
Fuse: 3A type F
Environmental requirements:
Operative: 0 – 40º C, maximum relative humidity: 90%
Non-operative: -10 – 50º C.