Diagraph LA/4700, User Manual, Page: 26 / 69

** Step 10 - Load the Media
Goal:
Correctly load the label supply and web the applicator.
LABEL SUPPLY CHANGEOUT
Begin by removing the last supply roll
core and remaining label liner from the
system. Insert the new roll over the
unwind fins and press roll firmly
against the unwind disk (A). Remove 2
feet of labels from the liner to create a
leader. Route the liner around the
dancer arm (B) and feed into the drive
module. Feed the liner through the gap
sensor (D), and around the peel blade
(E).
Be sure to avoid webbing over
the air assist tube (F) . Open the nip
roller arm lever (C). Take the liner to
the rewind (G), and use the clasp to
retain it. Once the liner is tracking
straight, side the outer web guide
collar (H) against the liner to keep it
from walking out of the gap sensor
path.
The label change out can be accomplished in less than a minute by an experienced user.
TAMP
FASA
WASA
Diagraph - an ITW Company LA/4700 User Manual - Revision B
Setup Page 25
Setup