9
Cable Installation
1 Locate the OBDII port. The
connector is typically found
directly below the driver side
dash console.
2 Plug the OBDII connector into
the vehicle port.
3 Route the HDMI end up the
driver side dash.
(On most
vehicles, the side panel may
be removed to expose the
underside of the dash for easier
routing. Leave exposed until
after the display is installed.)
Windshield Mount Installation
1 Use the alcohol wipe to clean
the windshield in the area you
plan to place the suction cup.
Allow the glass to fully dry.
2 Firmly press and hold the
suction mount against the glass.
3 Rotate the Cam Lever
towards the glass to create the
suction.
4 Plug the HDMI connector
into the back of the device
and mount the device onto the
mount.
Summary of Contents for Trinity 2
Page 1: ......
