DiabloSport Trinity 2 Manual Download Page 34

Page: 34 / 39

Recording

Use the recording option to log and save vehicle data.

1 While the Gauge Screen is in view. Open the pull down menu by

swiping downward starting from the top of the screen.

2 Press the

Record

button to start the recording process. When the

desired amount of information has been gathered, press the

Stop

button.

Record Stop

DataViewer Download

This windows software allows OBDII data logs that were recorded with

the DiabloSport tuner to be opened and viewed. This software can be

downloaded from the DiabloSport website.

1 Go to

website.

2 Click the DOWNLOADS tab located at the top of the page.

3 Select the DOWNLOAD button under DataViewer.
4 Click the RUN button on the pop-up menu.
5 Follow the on-screen instructions.

NOTE: The LED

above the recording

icon will shine blue

during the

recording.

Summary of Contents for Trinity 2








































Search results

Summary of Contents for Trinity 2

Reviews:

Related manuals for Trinity 2

Brands by name

Popular brands

DiabloSport Trinity 2, Manual

Search results

Summary of Contents for Trinity 2

Reviews:

Related manuals for Trinity 2

Brands by name

Popular brands