16
Plug must be removed from socket-outlet before cleaning or
maintaining the appliance.
IMPORTANT WARNINGS
Prior to plugging in the product, check that your mains voltage is the same as the one indicated on the
product label.
The mains connection cable must not be tangled or wrapped around the product during use.
Do not pull on the connection cord in order to unplug it.
Do not use, connect or disconnect the device to the mains with your hands or feet wet.
Proceed according to the conservation and cleaning section of this manual for cleaning.
Unplug the product immediately from the mains in the event of any breakdown or damage and contact
an authorised Technical support service.
In order to prevent any risk of danger, do not open the device. Only qualified technical personnel from
the brand´s Official Technical support service may carry out repairs or procedures on the device.
Any incorrect use or improper handling of the product shall render the warranty null and void. Only an
authorised technical support service centre may carry out repairs on this product.
This appliance is designed exclusively for domestic use, in no case should be a commercial or industrial
use. In case of misuse or tampering with the product, it will be out of warranty.
Do not use the appliance to vacuum liquids (water, etc), sharp objects (pins, pins, nails, glass, etc), in-
candescent objects (matches, cigarettes).
B&B TRENDS SL.
disclaims all liability for damages that may occur to people, animals or objects, for
the non-observance of these warnings.
ASSEMBLING THE VACUUM CLEANER
Assembling the flexible tube
Unplug the unit
Put the end of the hose into the air intake socket. (on the tank)
Fix the floor brush on the other end of the hose.
USE
1-Before using the appliance, unwind length of cable and insert the plug into the power socket.
2-Press the ON/OFF button to switch the appliance on.
