50
Inlet hose connection
1.Connecting water hose to inlet, make sure
it is connected firmly. Do not turn on the machine at this moment.
2.Turn on the tap, make sure the inlet water pressure keeps
between 0.01Mpa and 0.3Mpa.
3.Pull the trigger till all the air is pushed out of machine and water
flows from the gun. It means now pump is full of water.
4.Then you can turn on the switch.
See picture 3
OPERATION
Gun operation
Spray angle can be adjusted. The spray angle can be varied from straight to fan by turning the nozzle.
See picture 4
Summary of Contents for Acqua Rs3
