Page
8
Version 1.0
Oct 2014
Note : Depending on the stock availability, either kind of LED display could be used : indicator L1 to L4 at the side
or indicator L1 to L4 at the bottom.
Setting of Local Time
When the oven is connected to the mains for the first time, timer displays 12.00 and LED L4 flashes. While L4 is
flashing, adjust the local time by “+” and “-“ keys.
5 seconds after adjustment, LED L4 will stop flashing and the local time is saved.
If the time setting is wrong, press the “mode” key until L4 is flashing again, and adjust the time.
Count down
Press the “mode” key until LED L3 is flashing. The countdown timer can be set from 1 min to 2 hour and 30mins.
When L3 stops flashing and light up continuously, the countdown timer starts. Buzzer rings (2 beeps every 2
seconds) when the countdown timer comes to an end and again L3 will flash. Press any key to cancel the buzzer
and now the timer will show local time. If the buzzer is not cancelled by user, it will go off automatically after 2
mins.
The countdown timer could be set at any time even when the cooking is in process.
Cooking Duration
Press the “mode” key until LED L1 is flashing. Set the desired cooking duration by “+” and “-“ key. Cooking
duration could be set between 1 min to 10 hours. 5 seconds after setting, timer will be automatically saved. L1
will now light up continuously and the timer starts. Display is now showing local time. When the cooking
duration comes to an end, buzzer rings (4 beeps every 2 seconds) and again L1 will flash. Press any key to cancel
the buzzer. If the buzzer is not cancelled by the user, it will go off automatically after 2 mins.
Cooking End Time
Press the “mode” key until LED L2 is flashing. Cooking end time could be set up to 23.59h by “+” and “-“ key.
Timer will be saved 5 seconds after adjustment. Timer starts now and L2 will light up continuously. The display is
now showing local time. Buzzer will ring when the timer comes to an end (4 beeps every 2 seconds) and again L2
will flash. Press any key to cancel the buzzer.
It is possible to combine cooking duration & cooking end time setting together. Set the two functions as
mentioned above, and L1 & L2 will light up continuously. Oven will start the cooking process at a time where
“Cooking Duration” will end at the “Cooking End Time”.
For example, cooking duration is set at 1 hour and 30 mins while the cooking end time is set at 12.00h, oven will
automatically start working at 10.30 local time.
L1 : Cooking Duration
L2 : Cooking End Time
L3 : Countdown
L4 : Local Time
