Operation
Range Button
When the meter is first turned on, it automatically
goes into AutoRanging. This automatically selects the
best range for the measurements being made and
is generally the best mode for most measurements.
For measurement situations requiring that a range be
manually selected, perform the following:
1. Press the RANGE button. The “AUTO” display
indicator will turn off.
2. Press the RANGE button to step through the
available ranges until you select the range
you want.
3. Press and hold the RANGE button for 2 seconds
to exit the ManualRanging mode and return to
AutoRanging.(If backlight is turned on, please
press BACKLIGHT button it will turn off).
Data Hold Button
The Data Hold function allows the meter to “freeze” a
measurement for later reference.
1. Press the DATA HOLD button to “freeze” the
reading on the indicator. The indicator “HOLD”
will be appear in the display.
2. Press the DATA HOLD button to return to normal
operation.
Summary of Contents for DL9205
Page 1: ...DL9205 AUTORANGING MULTIMETER operating manual EN 61010 1 CAT III 600V ...
Page 30: ...Notes ...
Page 31: ...Notes ...
