DC Current Measurements
Torch
Press and hold the top button to turn the torch on.
Release the button to turn the torch off.
Data Hold
To freeze the current reading on the LCD, press the
“Hold Backlight” key. The word HOLD will appear on the
LCD while the meter is in the Data Hold mode. To release
the Data Hold function and return the meter to normal
operation, press the “Hold Backlight” key again. The
word HOLD will switch off.
Backlight display
Press and hold the “Hold Backlight” key for more than
2 seconds to turn on the backlight. This will also activate
the Data Hold function. To release the Data Hold function
and return the meter to normal operation, press the Data
Hold key momentarily. To turn off the backlight, press and
hold the “Hold Backlight” key for more than 2 seconds
Auto Power Off
The auto off feature will turn the meter off after 7 minutes.
Battery Replacement
1. When the low battery symbol appears on the
LCD the batteries must be replaced.
2. Power down and remove the rear battery
compartment Phillips screw.
3. Lift off the battery compartment cover and replace
the two 1.5V AAA cells.
4. Replace compartment cover and secure the screw..
Operations
Non-Contact AC
Voltage Meassurements
