Remedy:
Rotate flywheel by hand to
bottom of stroke: Remove brake collar
and brake assembly. Remove screw R
and pin S. Pull out clutch dog. Remove
burrs particles. Replace spring is weak
or broken. (To replace clutch dog
remove bolts T and slide flywheel in
direction indicated by arrow. Insert
clutch dog and pin S. Tighten screw R.
Slide flywheel back into place and re-
tighten bolts T.)
TROUBLE SHOOTING
Problem:
Double tripping, or not stopping at
end of single cycle.
Cause:
Brake too loose, causing dog to
coast on by release lever.
Remedy:
Tighten brake adjustment.
Cause
: Brake too tight, or ram binding,
causing release lever to slip by instead of
pulling clutch dog.
Remedy:
Loosen brake, or remove pin
N and check for binding in ram. If
binding remove cap and remove burrs
and polish ram until it is operating
freely.
Problem:
Machine will not operate when pedal
is depressed.
Cause:
Clutch dog binding, or broken
spring.
TROUBLE SHOOTING
5
