24
Safety Instructions:
Warning: Now here we suggest that you should consult with your physician or health professional before
starting your workout, especially for the age up to 35 old or once-health problem people. We take no
responsible for any troubles or hurts if you don’t following our specification. Treadmill will be carefully
assembled and covered the motor shield, then connect to the power.
Before the assembly, be sure to check if delivery is complete by using the included
parts-list.
1, Ensuring the safety clamps were attached to the clothing or belts before using the treadmill.
2, Please do not insert any items to any part of the equipment, which would damage the equipment.
3, Position the treadmill on a clear, level surface. Do not place the treadmill on thick carpet as it may
interfere with proper ventilation. Do not place the treadmill near water or outdoors.
4, Never start the treadmill while you are standing on the walking belt. After turning the power on and
adjusting the speed control, there may be a pause before the walking belt begins to move, always
stand on the foot rails on the sides of the frame until the belt is moving.
5, Wear appropriate clothing when exercising on the treadmill. Do not wear long, loose fitting clothing
that may be caught in the treadmill. Always wear running or aerobic shoes with rubber soles.
6, Keep the children and pets away from the treadmill while starting workout.
7, Don’t exercise in 40-Minutes after dinner.
8, The equipment is suitable for adults, Juveniles need be accompanied with adults while workout.
9, You must hold on to the handrails until you become comfortable and familiar with the treadmill at your
first start the workout.
10, Treadmill is indoor-using equipment, not outdoor-using for avoiding damage. Keep the store-place
clean and flat, drying. Prohibiting the other purpose using, only for workout.
11, Please purchase the power-line to the distributor or contact with our company directly, for the
power-line only equip to the treadmill.
12,If the treadmill should suddenly increase in speed due to an electronics failure or the speed being
inadvertently increased, the treadmill will come to a sudden stop when the pull pin is disengaged from
the console.
13, Do not connect line to the middle of cable; do not lengthen cable or change the cable plug; do not put
any heavy thing on cable or put the cable near the heat source; forbid using socket with several
holes, these may cause fire or people may be hurt by the power.
Summary of Contents for DHS 9520
Page 20: ...19 LISTA PARTILOR COMPONENTE...
Page 43: ...42 EXPLODED DRAWING...