DHS Fitness DHS 6309, Owner'S Manual

Page: 16 / 22

- 15 -
ASSEMBLY INSTRUCTION
STEP 1:
Attach the Low cross brace (2) to the Vertical tube (1R&L) with the Hex Bolt (34), Metal bracket
(3), Washer (29), and Nylon nut (30). Then put on the Nut caps (31).
Insert the Barbell supports (12) and the Top cross brace (8) into the Vertical tube (1R/L); After
adjusting the Top cross brace (8) at a proper position, fix the L-pin (19) and Tighten it with the
Knob (20) as shown.
STEP 2:
Fix the Seat support (4) to the Low cross brace (2) with the Hex Bolt (34), Metal bracket (3),
Washer (29), and Nylon nut (30). Then put on the Caps (31). Lock the Bottom tube (11) to the
Seat support (4) using the Washer (29) and Nylon nut (30). Then put on the Caps (31).