DHS Fitness 3001, Owner'S Manual

Page: 24 / 28

- 23 -
STEP 5
Tight turning arm steel wire (20) on right swing arm (8R) with hex bolt (52), flat washer and
nylon nut (60). Put turning arm steel wire (20) thought pulley (31).
NOTE: Make sure thought the turning arm steel wire (20) before lock the pulley (31).
Fasten the pulley cover (32) and pulley (31) onto main support frame (1) with hex bolt (49),
flat washer (63) and nylon nut (60).
Fix the pulley cover (32) and pulley (31) onto m
ovable pulley clamping ring (26) with hex bolt
(49), flat washer (63) and nylon nut (60) as shown.
Fix the other side of turning arm steel wire (20) on swing arm (8L) with hex bolt (52), flat washer
(63) and nylon nut (60).
Connect the turning arm steel wire (20) as the picture shows.