Den Haan Rotterdam
Rev. 1.3
Page 5 of 13
The electrical construction of the searchlight is manufactured in accordance with international standard IEC 60598-1, conform the directives
73/23/EEC and 93/68/EEC.
Maintenance
Lamp replacement
1.
Switch off the main power
Caution
– hot lamp. Let the lamp cool down, wait for at least 10 minutes before going
further
2.
Open the drum
3.
Pull the lamp out
4.
Ensure that the replacement lamp is of the same type
5.
Take a clean cloth to place the new lamp
(Do not touch the lamp with bare fingers, remove any fingertips with alcohol and rub it
dry)
6.
Check the neoprene sealing of the front glass and rub it in with talcum powder
7.
Close the drum
8.
The searchlight is ready to use
Preventive maintenance
Clean the searchlight with clean water regularly. Do not use any aggressive cleaning agents.
Summary of Contents for 150
Page 13: ......
