Den Haan Rotterdam
Rev. 1.3
Page 4 of 13
The electrical construction of the searchlight is manufactured in accordance with international standard IEC 60598-1, conform the directives
73/23/EEC and 93/68/EEC.
Safety notes
WARNING
- Turn power off before inspection, installation or removal
Risk of fire
- Keep combustible materials away from lamp
- Use eye protection when handling lamp
-
Do not touch glass with bare hands
- Do not exceed 105% of rated voltage
CAUTION
Risk of burn
- Allow lamp/fixture to cool before handling
- Turn power off before installing lamp
Lamp may shatter and cause injury if broken
- Do not use lamp if outer glass is scratched or broken
- Dispose of lamp in a closed container
- Wear safety glasses and gloves when handling lamp
Mounting instructions
Mechanical
Place the searchlight horizontal with plenty of space for the head to move in any direction. For
dimensions see annex 1
Electrical
Install the electrical wiring according to annex 2.
Keep the distance between the power supply and lamp as sort as possible. Long wires will
increase the voltage drop near the sealed beam lamp, decreasing the light output.
Warning
Den Haan Rotterdam accepts no responsibility for any damage if the searchlight is
installed and / or used improper. When in doubt consult a qualified electrical
technician.
Summary of Contents for 150
Page 13: ......
