39
DHOLLANDIA
NOTICE
Check for visible leaks of hydraulic oil as the system is being pressurized. If there is a leakage, correct the problem prior to continuing.
Bring the lift to ground level using the “DOWN” function. Check if the roll-stop automatically lowers when the ground level has
been reached.
Return the lift to its storage position using the “STOW” function.
3.2
COMMISSIONING & QUALITY CONTROL
Finish the wheelchair lift in accordance with local regulations.
Execute all functions a minimum of 5 times to ensure the wheelchair lift functions correctly. Pay special attention to:
1.
Smooth and quiet deployment out of the cassette.
2.
Smooth and quiet operation through the full range of motion of the platform.
3.
Correct alignment of bridge plate and the vehicle floor.
4.
Correct stowage of the wheelchair lift in its travel position.
Follow the adjustment instructions in section 4 when the bridge plate doesn’t align correctly with the vehicle floor before
proceeding.
Work through the (PDI) Pre delivery inspection checklist in the appendix and complete the practical load tests indicated. Fill-out
the FITTING DECLARATION.
During weight test, verify if the hydraulic pump pressure suits the maximum rated lift capacity in this particular mounting situation.
Adjust the pressure if too high or too low, seal the pressure relief valve afterwards using the provided tamper-evident cap.
NOTICE
WARNING
The PDI checklist completes the final quality inspection of the installation. Once completed successfully, it will certify the safe
and reliable operation of the wheelchair lift.
Operating a wheelchair lift that hasn’t successfully passed the PDI can lead to premature wear or damage of the wheelchair
lift itself.
Operating a wheelchair lift that hasn’t successfully passed the PDI can put the operator and third parties at great risk, and
could result in severe personal injury or death.
WARNING
Improper use of the wheelchair lift will put the operator at great risk of serious bodily injury and death. If in doubt how to use
wheelchair lift correctly, installer should consult the operation manual prior to continuing
Air might be trapped in the hydraulic circuits, as long as the wheelchair lift has not been bled. Air can cause the wheelchair lift
to make unexpected movements and can put the installer at great risk of serious bodily injury. The installer should remain vigilant
and stay out of the range of motion of the platform and the moving parts of the wheelchair lift as long as the hydraulic circuits
have not been purged.
