Version 1.3.0 - 07.11.2011
6
Assembling and Wiring the Hardware
Specifications and design are subject to change without notice. The content of this document is for information only. The information presented in this document does not form part
of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use.
Publication thereof does neither convey nor imply any license under patent rights or other industrial or intellectual property rights.
5
Assembling and Wiring the Hardware
In the following you can find information on the mechanical assembling and wiring of an 52/SX Mixing Console.
Warning
Avoid damaging components by electrostatic discharge (ESD).
Before you touch or mount electronical components, make sure you do not carry
any electrostatic charges. Earth yourself using a grounded metal object (heater,
rack) to divert electrostatic charges immediately before you touch electronical
components.
5.1
Installation Information XS Core and XS Multi-I/O Box
Front view of XS Core and XS Multi-I/O Boxes installed in a 19'' mounting
rack.
Warning
In a 19"-rack, in order to ensure the air flow for cooling the device, at least one
empty rack unit (1 U) is required above and below the XS Core and XS Multi-I/O
Box.
If more heat-emitting devices are mounted in the rack, more space for
ventilation is necessary. Do not cover the perforated metal plates on top and on
the sides of the cases.
Generally, avoid operating devices which produce much heat close to the XS
Core and Multi-I/O Boxes.