DHD Power Cruiser 52/XR Manual Download Page 32 | Manualshive

Page: 32 / 60

background image

Version 1.14.0 - 14.04.2010

29

Configuration and Operation of an 52/XR MADI Router

Specifications and design are subject to change without notice. The content of this document is for information only. The information presented in this document does not form part
of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use.
Publication thereof does neither convey nor imply any license under patent rights or other industrial or intellectual property rights.

misinterpretation will occur. Therefore, check the values in the

Level Adjust

column of all 52-5230 and 52-5250

modules and - if necessary - choose again the wanted values for the single inputs to correct the settings.

7.1.6

Synchronisation

Selecting the

Audio

branch, displays the synchronisation window. Here you can do refinements on the current device

synchronisation.

It is possible, to configure two independent synchronisation sources.

Sync Source 1

is always meant to be the master

sync source and is used by the system as long as it is available. If it fails and a secondary sync source is configured and
available, the system automatically switches over to

Sync Source 2

. If this source is not available, too, or not

configured, the system switches to

Internal Synchronisation

.

Currently, the Toolbox5 supports synchronisation frequencies of 48 kHz and 44.1 kHz. In a future version, also 96 kHz and
88.2 kHz will be supported. The hardware is already able to handle both higher frequencies.

Switch on the

VariSpeed

option, if you want to synchronise the router to an external synchronisation frequency with a

larger jitter. This option activates a VariPLL, which could handle such sources.

Note

The VariSpeed option is ignored by the device if the active sync source is

BNC 1

Video

.

You can choose the synchronisation source out of a list of 9 possible sources:

·

Internal

·

BNC 1 Word Clock

·

BNC 2 Word Clock

·

MADI 3.1

·

MADI 13.1

·

RJ45 AES3/EBU

·

BNC 1 AES3/EBU

·

BNC 2 AES3/EBU

·

BNC 1 Video

(supported standards: PAL, NTSC) - If the video sync is used, the VariSpeed option is not useable.

«
...
30
31
32
33
34
...
»

Summary of Contents for 52/XR





























































Reviews:

No comments

Related manuals for 52/XR

Brand: Panasonic Pages: 24

Brand: Panasonic Pages: 2

BB-HCM381A - Network Camera

Brand: Panasonic Pages: 28

BB-HCM381A - Network Camera

Brand: Panasonic Pages: 2

Brand: Cambium Networks Pages: 29

Brand: Qixiang Technology Pages: 16

Brand: ACTi Pages: 12

HiGain H4TU-R-402 List 5A

Brand: ADC Pages: 7

SecPath F50X0 Series

Brand: H3C Pages: 41

LN1000 - RELEASE NOTES 8-27-2010

Brand: Juniper Pages: 64

ReadyNAS Duo v2

Brand: NETGEAR Pages: 100

Turbo 16/4 Token-Ring PC Card 2

Brand: IBM Pages: 123

Brand: Quamtum Pages: 42

Brand: Generic Pages: 51

ZFR1831 Pro Series

Brand: Johnson Controls Pages: 12

Brand: Edimax Pages: 8

Brand: Edimax Pages: 19

Brand: SingTel Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands