audioShare Control Relay Module Installation Guide v00r01-090421.wpd
14
Status Indicators
There are 3 status indicators on the CRM. The red light indicates the general status of the CRM.
See
CRM Status/Diagnostic Codes
on page xx). A blue light on the output indicates that the N.O.
relay contacts are closed. A blue light on the input indicates that the relay/switch input is closed or
that the TTL input is receiving a logic High state.
CRM Operation Modes
The following is a list of preset operating modes which can be selected from any wall station. If
none of these modes work for your application, you can setup your own configuration from any PC
connected to the system using the configuration software supplied with the CRM (also downloadable
from our website).
Mode 1 - Momentary 1 - operates when addressed until preset timeout, 3 sec.