Assemble Ring to Base Stand
(for the 2.4 m & 2.7m)
You will have to assemble the 39” ring to the Ge-Mini base. Look at the
photo of the mount in photo Fig. #3, you will notice that the top of the
mount has a bracket to attach the elevation arm. The bottom of the 2”
framework has two tabs. Insert a ½”x ¾” x ½” long brass bushing (found in
the bolt bag) into each of the tabs. Place the ring on the base stand, inserting
the tabs (with the bushing) into the double ear tabs. Secure with ½” x 2 ½”
bolt, ½” lock washer & nut. Next install the elevation actuator. Attach the
gimball actuator clamp to the right side rear of the 2” square tube with a ½”
x 4 ½” bolt. Then take the eyebolt on the end of the actuator and put it in
between the top bracket of the frame work of the ring. Use a ½” x 2” bolt
and use a lock washer and nut to secure it in place. This elevation actuator
will be used to precisely aim the dish to the satellite you are using.
Please see the parts listed supplied to
help identify all parts for both the
Dual Powered Ge-Mini and the Fixed
Az-El Ge-mini. You will find these
drawings on the previous pages of
this instruction manual. Note the
Fixed Az-El Ge-Mini does not
include the motors or gears and
drives. These parts are only used for
the Dual Powered Ge-mini.
Fig. #3
PAGE 6
