DH Instruments E-DWT-H, Operation And Maintenance Manual

Page: 21 / 126

2. INSTALLATION
Page 11 © 2009 DH Instruments, a Fluke Company
2. Installation
2.1 Unpacking and Inspection
2.1.1 Removing from Packaging
E-DWT complete with accessories is delivered in a corrugated container with suspension
packaging.
Remove the E-DWT-H and its accessories from the shipping container and remove each
element from its protective plastic bag.
2.1.2 Inspecting Contents
Check that all items are present and have no visible damage. If damage is noted, report it to
your Receiving Department for appropriate action.
A new E-DWT-H includes all items listed in Table 2.
Table 2. E-DWT-H packing list
DESCRIPTION PART NO.
E-DWT-H electronic deadweight tester 3390864
ACCESSORIES: 3389701
(3389712 CE)
1 ea. Power cord (7.5 ft) 3133781
(3153005 CE)
1 ea. 12 VDC power supply pack 3335610
4 ea. Handle, variable volume 3329907
2 ea. Collar, SS, DH500 3068607
1 ea. E-DWT-H Operation and Maintenance Manual 3389682
1 ea. Calibration Report 3152121
1 ea. General Accessories Disk 3139043
2.2 Site Requirements
Install E-DWT-H on a flat, stable surface at a convenient height. If using the battery/charger pack,
consider its placement.
When used with a battery/charger pack, E-DWT-H requires no external support utilities. If not using the
battery, an electrical power source of 100 to 240VAC, 50-60 Hz is required.