Vise Kit Explanation
Selecting the Head Detection Jig
Use different head detection jigs depending on the height from the base table to the imprinting surface.
Important: Use the head detection jig with the correct height.
If you use the incorrect jig, the head will strike the material, leading to defective imprinting and part damage.
Height to the imprinting surface Head detection jig to use
24 to 36 mm
(0.95 to 1.42 in.)
Low
Higher than 36 mm
(1.42 in.) (*1)
High
*1: Imprinting is not possible if the height from the base table to the imprinting surface exceeds
50 mm (1.96 in.).
11
Summary of Contents for VL-300
Page 16: ...R1 200608 FA02211...
