Vise Kit Explanation
Mounting on the LD-300
Insert the protrusions on the bottom surface into the holes on the base table to attach the center vise or grid
table.
To attach the film frame, insert its supports into the holes on the base.
Important
When not using the base, store it after removing it from the machine.
Center vise
or grid table
Base table
Important:
Ensure that the height from the base table to the imprinting surface is 50 mm (1.96 in.) or less.
The center vise and grid table can be used vertically or horizontally. Select an appropriate orientation according
to the material size and the area to be imprinted.
Area to be imprinted
Area to be imprinted
Base
Film frame
Base
50
mm (1.96
in.) or less
10
Summary of Contents for VL-300
Page 16: ...R1 200608 FA02211...
