1
Getting
Started
Installation
Removing the Retainers
Retaining materials are attached to protect the machine from vibration during shipment. When installation is
complete, remove and save these components.
Removing the Retainers
The machine is secured with retainers and screws at five points (
through
below). Remove all the screws
and retainers with the included hexagonal wrench. Any retainers or screws that remain may cause faulty
operation or breakdown when the power is switched on.
Items Used
Retainer
Hexagonal
wrench
Retainer A (2)
Retainer B (1 each for L and R)
Retaining screws
(7)
Retainer B
The machine is
secured on the
left and the right.
Retainer A
Retainer A
Storing
The retainers and screws are required when moving the machine to a different location. Keep the removed
screws and retainers (A) by mounting them to the lower back side of the machine. Retainer B cannot be at-
tached to the machine and must be stored separately to prevent them from getting misplaced.
Rear view
30
