dg_nvmeg4ip_instruction_xilinx_en.doc
20-Apr-20
Page 12
Figure 3-7 shows error message when data verification is faile
d. “Verify fail” is displayed with
the information of the 1
st
failure data, i.e. the error byte address, the expected value, and the
read value.
User can enter any keys to cancel the read operation or wait until finishing Read command.
Similar to the normal condition, the output performance is displayed on the console when
the user does not enter any keys to stop the operation.
After enter the key to cancel the operation, the read command operation still runs as the
background process. It is recommended to power-off/on AB18
and then press “RESET”
button to recover the error situation.
Verification error with cancellation
Message when operation is cancelled
User enters some keys to
cancel the operation
Wrong pattern
Message when
verification is failed
Output performance
Verification error without cancellation
Figure 3-7 Data verification is failed
