36
EN
Preparation of the adapter cable
●
Connect the two yellow cable ends with the
supplied butt connectors as shown in the cable
diagram to the right.
●
Connect the plug X1 as shown in the cable
diagram on the right..
Note the information on page 32 when
preparing the cable.
Connecting the dfreeeze
®
receiver
●
Connect the plug connector with the respective
devices as shown in the system diagram to the
right.
Installation configuration 3
The installation configuration 3 describes the connection
of the dfreeeze
®
receiver to a retrofitted Webasto parking
heater with an already existing radio receiver T91/T100,
which is connected to the parking heater via W-bus. In
addition, the configuration is also possible for ex works-in
-
stalled parking heaters from the brands Ford, Peugeot,
Citroen and Landrover with the existing T91/T100 radio
receiver.
Installation configuration 3
Telestart via W-bus
Retrofitted Webasto parking heaters with existing radio
receiver T91/T100 and W-bus.
Pin 2*
W-Bus
*The information refers to the signals on the dfreeeze
®
receiver (plug X3).
Summary of Contents for parking heater remote control
Page 1: ...Einbauanleitung Installation guide ...
Page 23: ...23 DE Für Ihre Notizen ...
Page 45: ...45 EN For your notes ...
Page 46: ...46 DE ...
