28
English
English
Connectors
One connector for 2 additional external USB ports
One connector for IrDA interface
Two RAID IDE connectors (WB72-SR)
Two IDE connectors
One floppy drive interface supports up to two 2.88MB floppy
drives
Three ATX power supply connector
One Wake-On-LAN connector
One Wake-On-Ring connector
CPU, system and second fan connectors
Two internal audio connectors - CD-in and TAD
ATA RAID - Redundant Array of Inexpensive Disk (WB72-SR)
RAID 0 (striping) or RAID 1 (mirroring) - RAID 0 and RAID 1
cannot coexist
Two independent IDE channels support up to 4 drives (UDMA
modes 33/66/100 or EIDE)
Suppor ts PIO modes 0/1/2/3/4, DMA modes 0/1/2 and
UDMA modes 0/1/2/3/4/5
PCI Bus Master IDE Controller
Two PCI IDE interfaces support up to four IDE devices
Supports ATA/33, ATA/66 and ATA/100 hard drives
PIO Mode 4 Enhanced IDE (data transfer rate up to 14MB/sec.)
Bus mastering reduces CPU utilization during disk transfer
Supports ATAPI CD-ROM, LS-120 and ZIP
IrDA Interface
The system board is equipped with an IrDA connector for wireless
connectivity between your computer and peripheral devices. It
supports peripheral devices that meet the IrDA and ASKIR standard.
USB Ports
The system board supports 4 USB ports. Two onboard USB ports
are located at the ATX double deck ports of the board. The J16
connector on the system board allows you to connect the optional
3rd and 4th USB ports. These optional USB por ts, which are
