DFI SD331-C236 User Manual Download

Page: 21 / 71

Important:

If you are using the Wake-On-USB Keyboard/Mouse function for 2 USB ports, the

+5V_standby power source of your power supply must support ≥1.5A. For 3 or more

USB ports, the +5V_standby power source of your power supply must support ≥2A.

Wake-On-USB Keyboard/Mouse

The Wake-On-USB Keyboard/Mouse function allows you to use a USB keyboard or USB mouse

to wake up a system from the S3 (STR - Suspend To RAM) state. To use this function:

Audio

Rear Audio

The system board is equipped with 2 audio jacks. A jack is a one-hole connecting interface for

inserting a plug.

• Line-out Jack (Lime)

This jack is used to connect a headphone or external speakers.

• Mic-in (Pink)

This jack is used to connect an external microphone.

Front Audio (optional)

The front audio connector allows you to connect to the second line-out and mic-in jacks that

are at the front panel of your system.

Driver Installation

Install the audio driver. Refer to the chapter 4 for more information.

Rear Audio

Line-out

Mic-in

Front Audio

(optional)

Mic2-L

Line2-R

ont_IO_S

ense

GND Pr

esence Signal

Mic2-

Line2-

Mic2-R

Line2-L

Summary of Contents for SD331-C236








































































Search results

Summary of Contents for SD331-C236

Reviews:

Related manuals for SD331-C236

Brands by name

Popular brands

DFI SD331-C236, User Manual

Search results

Summary of Contents for SD331-C236

Reviews:

Related manuals for SD331-C236

Brands by name

Popular brands