DFI SD330-H110 User Manual Download

Page: 62 / 76

www.dfi .com

Chapter 4 Supported Software

Chapter 4

Intel Graphics Drivers

To install the driver, download “SD330 Graphics Driver” zip file at our website.

1. Setup is now ready to

install the graphics driver.

Click “Next”.

2. Read the license agreement

then click “Yes”.

By default, the “Automatically run WinSAT and enable the Windows Aero desktop theme”

is enabled. With this enabled, after installing the graphics driver and the system rebooted,

the screen will turn blank for 1 to 2 minutes (while WinSAT is running) before the Win-

dows 7/8.1/10 desktop appears. The “blank screen” period is the time Windows is testing

the graphics performance.

We recommend that you skip this process by disabling this function then click “Next”.

4. Setup is now installing

the driver. Click “Next” to

continue.

3. Go through the readme

document for system re-

quirements and installation

tips then click “Next”.

5. Click “Yes, I want to restart

this computer now” then

click “Finish”.

Restarting the system will

allow the new software

installation to take effect.

Summary of Contents for SD330-H110













































































Search results

Summary of Contents for SD330-H110

Reviews:

Related manuals for SD330-H110

Brands by name

Popular brands

DFI SD330-H110, User Manual

Search results

Summary of Contents for SD330-H110

Reviews:

Related manuals for SD330-H110

Brands by name

Popular brands