C
156
System Error Message
Hard Disk(s) fail (20)
HDD initialization error.
Hard Disk(s) fail (10)
Unable to recalibrate fixed disk.
Hard Disk(s) fail (08)
Sector Verify failed.
Keyboard is locked out - Unlock the key
The BIOS detects that the keyboard is locked. Keyboard controller is pulled low.
Keyboard error or no keyboard present
Cannot initialize the keyboard. Make sure the keyboard is attached correctly
and no keys are being pressed during the boot.
Manufacturing POST loop
System will repeat POST procedure infinitely while the keyboard controller is pull
low. This is also used for the M/B burn in test at the factory.
BIOS ROM checksum error - System halted
The checksum of ROM address F0000H-FFFFFH is bad.
Memory test fail
The BIOS reports memory test fail if the memory has error(s).
Summary of Contents for SB331-IPM
Page 1: ...SB331 IPM System Board User s Manual A18430136 ...
Page 73: ...73 3 BIOS Setup USB Port 0 to USB Port 13 Enables or disables the selected USB port ...
Page 84: ...84 4 Supported Software 3 Click Exit ...
Page 108: ...108 5 RAID 8 Click Yes I want to restart my computer now then click Finish ...