DFI SB102-D User Manual Download Page 49

Page: 49 / 59

www.dfi .com

Chapter 4 Supported Software

Chapter 4

1. Click “I accept the agree-

ment” then click Next.

Microsoft DirectX 9.0C (for Windows XP only)

To install the driver, click “Microsoft DirectX 9.0C” on the main menu.

2. To start installation, click

Next.

3. Click Finish. Reboot the

system for DirectX to take

effect.

Intel Graphics Drivers

To install the driver, click “Intel Graphics Drivers” on the main menu.

1. Setup is now ready to

install the graphics driver.

Click Next.

By default, the “Automatically run WinSAT and enable the Windows Aero

desktop theme” is enabled. With this enabled, after installing the graphics

driver and the system rebooted, the screen will turn blank for 1 to 2 minutes

(while WinSAT is running) before the Windows Vista desktop appears. The

“blank screen” period is the time Windows is testing the graphics perfor-

mance.

2. Read the license agreement

then click Yes.

Summary of Contents for SB102-D




























































Search results

Summary of Contents for SB102-D

Reviews:

Related manuals for SB102-D

Brands by name

Popular brands

DFI SB102-D, User Manual

Search results

Summary of Contents for SB102-D

Reviews:

Related manuals for SB102-D

Brands by name

Popular brands