DFI P5BTL User Manual Download Page 2 | Manualshive

Page: 2 / 71

background image

Copyright

This publication contains the information that is protected by copyright.
No part of it may be reproduced in any form or by any means or used
to make any transformation/adaptation without the prior written
permission from the copyright holders.

This publication is provided for informational purposes only. The
manufacturer makes no representations or warranties with respect to
the contents or use of this manual and specifically disclaims any express
or implied warranties of merchantability or fitness for any particular purpose.
The user will assume the entire risk of the use or the results of the use of
this document. Further, the manufacturer reserves the right to revise this
publication and make changes to its contents at any time, without obligation
to notify any person or entity of such revisions or changes.

All Rights Reserved.

Trademarks

Microsoft

®

MS-DOS

®

, Windows

TM

and Windows

®

95 are registered

trademarks of Microsoft Corporation. Intel and Pentium are registered
trademarks of Intel Corporation. Cyrix, 6x86, 6x86L and 6x86MX are
registered trademarks of Cyrix Corporation. AMD, K5 and K6 are
registered trademarks of Advanced Micro Devices, Inc. IBM is a registered
trademark of International Business Machine Corporation. Award is a
registered trademark of Award Software, Inc. Other trademarks and
registered trademarks of products appearing in this manual are the
properties of their respective holders.

Caution:
Danger of explosion if battery incorrectly replaced.
Replace only with the same or equivalent type recommended by the
manufacturer.
Dispose of used batteries according to the battery manufacturer’s
instructions.

«
1
2
3
4
...
»

Summary of Contents for P5BTL








































































Reviews:

No comments

Related manuals for P5BTL

KT333 DRAGON Plus

Brand: SOYO Pages: 34

Pentium P5I430TX/IIB TITANIUM IIB

Brand: QDI Pages: 53

CVN X570 GAMING PRO V14

Brand: Colorful Pages: 64

Brand: Gigabyte Pages: 104

Brand: Oki Pages: 24

Brand: ASROCK Pages: 2

Brand: BOSER Technology Pages: 38

Brand: Gigabyte Pages: 72

Brand: Zeal-All Pages: 8

Brand: Acorp Pages: 74

EVAL-AD2428WD1BZ

Brand: Analog Devices Pages: 6

Brand: ST Pages: 14

Brand: Parsun Pages: 93

Brand: Aaeon Pages: 53

Brand: Aaeon Pages: 46

Brand: EVGA Pages: 35

PN1 SLI2 Extreme

Brand: ECS Pages: 62

Brand: ComNav Technology Pages: 28

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands