2
Hardware Installation
11
2.4 Jumper Settings for CPUs Front Side Bus
Positionnement des cavaliers pour le bus frontal du
processeur
Jumpereinstellungen fuer CPU Vorderseitenbus
The default setting of jumper JP3 is
Auto - the system will automatically run
according to the FSB of the processor.
If you wish to overclock a 66MHz FSB
processor to 100MHz, set pins 1 and
2 to Off.
On : Auto(default) Off : 100MHz
Warning:
Overclocking a 66MHz FSB processor to 100MHz willl
provide better system performance. However, not all 66MHz
FSB processors are capable of running at 100MHz bus
speed. Therefore, if you are unable to boot your system when
set at 100MHz, make sure to set JP3 back to its default
setting.
1
2
1
2
All manuals and user guides at all-guides.com
all-guides.com