DFI P2XBL, User Manual, Page: 10 / 40

2
10
Hardware Installation
2.3 Jumper Settings for Clearing CMOS Data
Positionnement des Cavaliers pour Effacer les Données
CMOS
Jumpereinstellungen zum Löschen der CMOS Daten
Jumper JP5 - CMOS Clear
To load the default values stored in the ROM BIOS, please follow
the steps below.
1.
Power-off the system and unplug the power cord.
2. Set JP5 pins 2 and 3 to On. Wait for a few seconds and set JP5 back
to its default setting, pins 1 and 2 On.
3. Plug the power cord and power-on the system.
Future processor Future processor 7x
Future processor Future processor 7.5x
Future processor Future processor 8x
Processor
SW1
66MHz 100MHz
Frequency Ratio
Note:
Intel Pentium

II processor or Intel Celeron
TM
processor supports VID
(Voltage Identification). The switching voltage regulator on the system
board will automatically set the voltage regulator according to the voltage
of the processor.
1-2 On: Normal
(default)
2-3 On:
Clear CMOS Data
1 2 3
1 2 3
All manuals and user guides at all-guides.com