DFI nF2 U400S-AL User Manual Download Page 84

Page: 84 / 113

BIOS Setup

3.1.8 Genie BIOS Setting

The settings on the screen are for reference only. Your version may not be identical
to this one.

3.1.8.1 Current CPU Frequency is

This field will show the detected frequency of the CPU.

3.1.8.2 System Performance

This field is used to configure the system’s performance.

Optimal

This option provides the most stable system per-
formance.

Aggressive

This option uses the overclock settings for higher
performance but with higher risk of instability.

Turbo

This option uses the overclock setting for higher
performance but with higher risk of instability.

Expert

This option allows you to manually configure the
“CPU Interface” and “Memory Timings” fields.

Summary of Contents for nF2 U400S-AL


















































































































Search results

Summary of Contents for nF2 U400S-AL

Reviews:

Related manuals for nF2 U400S-AL

Brands by name

Popular brands

DFI nF2 U400S-AL, User Manual

Search results

Summary of Contents for nF2 U400S-AL

Reviews:

Related manuals for nF2 U400S-AL

Brands by name

Popular brands