DFI nF2 U400S-AL User Manual Download Page 70

Page: 70 / 113

BIOS Setup

3.1.4 Integrated Peripherals

The settings on the screen are for reference only. Your version may not be identical
to this one.

3.1.4.1 RAID Config

IDE RAID

Set this field to Enabled to allow configuring RAID on Parallel ATA
drives and Serial ATA drives.

IDE Channel 0 Master RAID and IDE Channel 0 Slave RAID

Set this field to Enabled to allow configuring RAID on the IDE
Channel 0’s master and slave channels.

IDE Channel 1 Master RAID and IDE Channel 1 Slave RAID

Set this field to Enabled to allow configuring RAID on the IDE
Channel 1’s master and slave channels.

SATA Primary Master RAID and SATA Secondary Master RAID

Set this field to Enabled to allow configuring RAID on Serial ATA
drives.

Summary of Contents for nF2 U400S-AL


















































































































Search results

Summary of Contents for nF2 U400S-AL

Reviews:

Related manuals for nF2 U400S-AL

Brands by name

Popular brands

DFI nF2 U400S-AL, User Manual

Search results

Summary of Contents for nF2 U400S-AL

Reviews:

Related manuals for nF2 U400S-AL

Brands by name

Popular brands