77
!
Award BIOS Setup Utility
USB KB Wake-Up From S3
Set this field to Enabled to use the Wake-On-USB Keyboard
function. This function allows you to use a USB keyboard to wake up
a system that is in the S3 (STR - Suspend To RAM) state. Refer to
Jumper Settings for Wake-On-USB Keyboard in chapter 2 for more
information.
Resume By Alarm
Enabled
When Enabled, you can set the date and time you
would like the Soft Power Down (Soft-Off) PC to
power-on in the Date (of Month) Alarm and Time
(hh:mm:ss) Alarm fields. However, if the system is being
accessed by incoming calls or the network (Resume On
Ring/LAN) prior to the date and time set in these
fields, the system will give priority to the incoming calls
or network.
Disabled
Disables the automatic power-on function. (default)
Date (of Month) Alarm
0
The system will power-on everyday according to the
time set in the Time (hh:mm:ss) Alarm field.
1-31
Select a date you would like the system to power-on.
The system will power-on on the set date, and time set
in the Time (hh:mm:ss) Alarm field.
Time (hh:mm:ss) Alarm
This is used to set the time you would like the system to power-on.
If you want the system to power-on everyday as set in the Date
(of Month) Alarm field, the time set in this field must be later than
the time of the RTC set in the Standard CMOS Features submenu.
