68
!
Award BIOS Setup Utility
Auto
The BIOS will automatically set the system according to
your hard disk drives timing.
Mode 0-4
You can select a mode that matches your hard disk
drives timing. Caution: Do not use the wrong setting
or you will have drive errors.
IDE Primary Master/Slave UDMA and IDE Secondary Master/
Slave UDMA
These fields allow you to set the Ultra DMA in use. When Auto is
selected, the BIOS will select the best available option after checking
your hard drive or CD-ROM.
Auto
The BIOS will automatically detect the settings for you.
Disabled
The BIOS will not detect these categories.
USB Controller
We recommend that you leave this field in its default setting -
Enabled.
USB Keyboard Support
By default, USB Keyboard Support is Disabled. However, if you are
using a USB keyboard under DOS, make sure to enable this
function.
Init Display First
This field is used to select whether to initialize the AGP or PCI first
when the system boots.
AGP
When the system boots, it will first initialize the AGP.
PCI Slot
When the system boots, it will first initialize PCI.
AC97 Audio
Auto
Select this option when using the onboard audio codec,
primary or secondary audio riser card, or audio/modem
riser card.
Disabled
Select this option when using a PCI sound card.
