![DFI LanParty UT RDX200 series User Manual Download Page 85](http://html.mh-extra.com/html/dfi/lanparty-ut-rdx200-series/lanparty-ut-rdx200-series_user-manual_2491252085.webp)
85
3
BIOS Setup
Sector
This field displays the number sectors per track.
Drive A
This field identifies the type of floppy disk drive installed.
None
No floppy drive is installed
360K, 5.25 in.
5-1/4 in. standard drive; 360KB capacity
1.2M, 5.25 in.
5-1/4 in. AT-type high-density drive; 1.2MB capacity
720K, 3.5 in.
3-1/2 in. double-sided drive; 720KB capacity
1.44M, 3.5 in.
3-1/2 in. double-sided drive; 1.44MB capacity
2.88M, 3.5 in.
3-1/2 in. double-sided drive; 2.88MB capacity
Floppy 3 Mode Support
The options are Enabled and Disabled.
Halt On
This field determines whether the system will stop if an error is
detected during power up. The default setting is All Errors.
No Errors
The system boot will not stop for any errors detected.
All Errors
The system boot will stop whenever the BIOS detects
a non-fatal error.
All, But Keyboard
The system boot will not stop for a keyboard
error; it will stop for all other errors.
All, But Diskette
The system boot will not stop for a disk error;
it will stop for all other errors.
All, But Disk/Key
The system boot will not stop for a disk or
keyboard error; it will stop for all other errors.
Base Memory
Displays the amount of base (or conventional) memory installed in
the system. The value of the base memory is typically 512K for
systems with 512K memory installed on the motherboard or 640K
for systems with 640K or more memor y installed on the
motherboard.