113
3
BIOS Setup
DQS Skew Control
The options are Auto, Increase Skew and Decrease Skew.
DQS Skew Value
This field is used to select a DQS skew value.
DRAM Drive Strength
This field is used to select a level of the DRAM drive strength.
DRAM Data Drive Strength
The options are Auto, Level 1, Level 2, Level 3 and Level 4.
Max Async Latency
This field is used to select the DRAM maximum asynchronous
latency time.
Read Preamble Time
This field is used to select the time prior to the max-read DOS
return when the DOS receiver is turned on.
Idle Cycle Limit
This field is used to select the cycle of MemCLKs before forcibly
closing (precharging) an open page.
Dynamic Counter
This field is used to enable the dynamic idle cycle counter.
DLL Disable
The options are Auto, Enable and Disable.
R/W Queue Bypass
This field is used to select the number of times the first operation in
the DCI read/write queue can be bypassed before the arbiter is
overridden and the first operation is chosen.
