58
2
Hardware Installation
The onboard IEEE 1394 port is at location CN3 (IEEE 1394-0) of
the system board.
It is also equipped with an IEEE 1394 connector at location J8
(1394-1) for connecting an additional 1394 device. The 1394 port
may come mounted on a card-edge bracket. Install the card-edge
bracket to an available slot at the rear of the system chassis then
insert the connector that is attached to the 1394 port cable to J8.
Make sure pin 1 of the cable connector is aligned with pin 1 of the
J8.
IEEE 1394 Ports
W
W
1394-0
+12V (fused)
1394-1
1
TP
A
+
Ground
TPB+
+12V (fused)
Key
TP
A-
Ground
TPB-
Ground
2
1 0
9
