100
3
BIOS Setup
Power Management Setup
The Power Management Setup allows you to configure your system
to most effectively save energy.
Phoenix - AwardBIOS CMOS Setup Utility
Power Management Setup
Item Help
Menu Level
X
ACPI Suspend Type
Run VGABIOS if S3 Resume
Soft-Off By PWR-BTTN
Wake-Up by PCI Card
PCI Express PME
USB KB WakeUp From S3(S4)
Resume by Alarm
x Date(Of Month) Alarm
x Time(hh:mm:ss) Alarm
** Reload Global Timer Events **
FDD, COM, LPT Port
PCI PIRQ[A-D]#
HPET Support
x HPET Mode
WDRT Support
x WDRT Run/Stop
x WDRT Count
S3(STR)
Auto
Instant-Off
Enabled
Enabled
Disabled
Disabled
0
0:0:0
Disabled
Disabled
Disabled
32-bit mode
Disabled
Stop
1023
ACPI Suspend Type
This field is used to select the type of Suspend mode.
S1(POS)
Enables the Power On Suspend function.
S3(STR)
Enables the Suspend to RAM function.
Run VGABIOS if S3 Resume
When this field is set to Auto, the system will initialize the VGA BIOS
when it wakes up from the S3 state. This can be configured only if
the “ACPI Suspend Type” field is set to “S3(STR)”. When this feature
is disabled, the system resume time is shortened but system will
need an AGP driver to initialize the VGA card. Therefore, if the AGP
driver of the card does not support the initialization feature, the
display may work abnormally or not function after resuming from S3.
↑↓→←
: Move
Enter: Select
F1: General Help
+/-/PU/PD: Value
F10: Save
ESC: Exit
F5: Previous Values
F6: Fail-Safe Defaults
F7: Optimized Defaults
The settings on the screen are for reference only. Your version may not be
identical to this one.
