1
Introduction
15
AC Power Failure Recovery
When power returns after an AC power failure, you may choose
to either power-on the system manually, let the system power-on
automatically or return to the state where you left off before
power failure occurs. Refer to “PWR Lost Resume State” in the
Power Management Setup section in chapter 3 for more infor-
mation.
1.2 Package Checklist
The system board package contains the following items:
!
The system board
!
Two user’s manual
!
Two IDE round cables for ATA/33, ATA/66, ATA/100 or ATA/
133 IDE drives
!
One 34-pin floppy disk drive round cable
!
One card-edge bracket mounted with 3 1394a ports
!
One serial ATA cable
!
One card-edge bracket mounted with 2 USB 2.0/1.1 ports
"
One card-edge bracket mounted with 1 S/PDIF-in port and
1 S/PDIF-out port (optional)
"
One card-edge bracket mounted with a 4-channel audio
output connector (optional)
"
One card-edge bracket mounted with a front audio output
connector (optional)
!
One FrontX I/O port assembly kit
!
One “RAID Driver” floppy diskette
!
One “Main Board Utility” CD
!
One “WinDVD/WinRIP Utility” CD
If any of these items are missing or damaged, please contact your
dealer or sales representative for assistance.
